Exhaust OEM
The best quality OEM exhaust products for Audi and Volkswagen are available at ECS Tuning Stop. A wide category of products such as the exhaust support bracket, gasket, hanger, locking nuts, etc., are available for sale at the ECS website www.ecstuning.com. Apart from the major components displayed in the ECS website, all other minor components are available at their department site. ECS ensures a cheaper deal online than going through their dealers.
OE Type Sleeve With Dual Clamps
A wide range of OE Type Sleeve With Dual Clamps that are used between Cat pipes and center muffler are available at ECS Tuning. Check the size of the pipe appropriate for each clamp for allowing a perfect fitting.
- Clamp range 46-51mm, to be used with a 48-49 mm pipe.
- Clamp range 47-51mm, to be used with a 55 mm pipe
- Clamp range 60mm, to be used with a 60 mm pipe
Gaskets on offer
The following gasket types are available at ECS online store under the category, Exhaust OEM.
- OE Exhaust Manifold Gasket- This is ideally used while installing a big turbo kit. The company offers a cheap insurance for any exhaust leakage caused due to this gasket.
- OE Turbo-to-Downpipe Gasket -Better Gasket for transverse KO3 and KO4’s Turbo/ Downpipe gasket. The company insists that the gasket be replaced whenever the downpipe is removed.
Exhaust Hanger
These are rubber hangers to be used in the front of rear muffler. The product comes along with the bracket.
Exhaust Manifold Copper Locking Nut
With a size 8mmX1.25, these non-flanged copper-locking nuts come from the famous Febi in Germany.
ECS Downpipe Hardware Kit
This kit consists of a set of hardware and a gasket that is to be used between turbo and downpipe. The hardware set includes OEM Studs (4) for turbocharge, OEM Nuts (4) for downpipe, and OEM HD washers (4) for downpipe.
OEM Hot Bolt Paste-170g
When applied on the roof of the thread and the contact area of the bolt head, this paste loosens the hot bolts.
Exhaust Manifold Studs
At ECS, these studs are available in ranges 8×38, 8×30, 8×35, etc. These studs are used to mount the exhaust manifold to cylinder head.
OEM Exhaust Manifold Flange Locking Nut
This locking and flanged nut comes with a size 8mm X 1.25
OEM Washer, Exhaust Manifold
This is used between manifold & nuts
OEM TDI Center Pipe
TDI center pipe comes without a center resonator. This TDI pipe can easily replace the factory pipes that come with center resonator. With the special design, it offers better sound quality and performance of the engine.
Center Exhaust Support Bracket
A pair of these rubber brackets is required to hold the center pipe
Apart from these OEM parts, ECS owns a collection of universal exhaust products. Look at the following in their website under the category, Exhaust – Universal.
- Catalytic converter – three variants with inlet/ outlet 2.25â€, 2.5†and 3.0â€. All of these have14″ length of converter itself, 6″ width & 4″ height
- Universal Flex Section – Available in configurations 2″X 4″, 2.25″X 4″, 2.5″X 4″, 3″X 6″. The section has welded necks that can be cut off if not required.
With the above and a variety of other branded products on display, ECS Tuning offers a satisfactory shopping experience to the customers.
